Diagram of ZW-A8 (Lingyu):
⑴: Non-woven fabric roll material, the maximum roll material diameter is 1.4 meters.
⑵: Automatic feeding correction device. The motor loads materials smoothly; photoelectric tracking correction; shutdown without materials; automatic tension.
⑶: Independent uniform tension device. Ensure that the tension of the whole machine from the largest to the smallest coil is even.
⑷: Folding and ironing device. Handwheel screw adjustment, ultrasonic welding.
⑸: Rectifying device for the rear complete machine. Control the center of the fabric of the back machine and the front machine to ensure that the bag mouth is neat.
⑹: Handle roll material, the maximum roll material diameter is 1.2 meters.
⑺: Double-channel automatic ironing device. The length of the handle is 380mm-750mm; the width of the handle is 25mm-30mm; the machine will stop if there is no material, and the machine will stop if there is no ironing handle.
⑻: Rear feeding device. Cooperate with the front feeding device to control the tension of the fabric when tracing the indentation.
⑼: Tracking indentation device. Color mark tracking; side indentation.
⑽: Front feeding storage device. Double-tracking feeding; pre-stored sheets to increase the speed of the whole machine; cold cutting knife.
⑾: Operation panel. Large touch screen operation; can swing 90 degrees, the interface is clear and easy to operate.
⑿: Double servo pulling device. The double servo adjusts the fabric and the mold parallel to control the neatness of the bag mouth. High-speed servo improves the speed of the whole machine.
⒀: Mould device. The servo synchronous wheel running device is high-speed and silent; the mold positioning device is convenient for mold replacement.
⒁: Side insert; bottom insert; ultrasonic welding device. Full motor structure, precise and high speed. The motor automatically adjusts the distance and is easy to operate.
⒂: Bag removal device. The four groups of bag removal are independently regulated and operated. Easy to operate.
⒃: Automatic bag folding device. At the same time, the finished three-dimensional bags are folded and flattened, and stacked together.
Technical Parameters:
Power supply |
380v |
|
|
Applicable raw materials |
Non-woven fabric, PP film, woven material coating (tube; coating) |
Average power |
15-20KW |
Material thickness |
50-120g |
Production speed |
55-90 pcs/min |
Bag making height |
150-450mm |
Width before bag making |
180mm - 570mm |
Bag making side width |
70-200mm |
Total Weight |
11500kg |
Feeding width |
370-1160mm |
Bag strip |
400 - 600mm |
Installation size |
7.8 meters in length × 5.2 meters in width × 2.5 meters in height |
Si tiene alguna consulta sobre cotización o cooperación, no dude en enviarnos un correo electrónico a zw1@china-zhengwei.como utilice el siguiente formulario de consulta. Nuestro representante de ventas se comunicará con usted pronto. Gracias por su interés en nuestros productos.