Equipment performance:
1. Twelve sets of servo motors (mould servo 17KW 22KW) for the whole machine ensure high-speed and stable operation of the equipment.
2. Using the material saving device (no waste on the edge), each bag saves 6MM material.
3. The equipment structure is U-shaped, covering an area of only 5.3 meters * 7.5 meters, saving site costs.
4. The function of automatic deviation correction of bag mouth and strip center distance is adopted to ensure that the bag mouth of each bag is flat and the strip is centered, which greatly improves the qualified rate of finished products.
5. The degree of automation is high, and the mold changing machine is automatically positioned, which greatly improves the efficiency.
6. Easy to operate, one person can complete bag making and packing.
7. Diversified bag-making functions, in addition to handbags, the function of punching pockets is also provided; in addition, additional functions such as stringing bags, buttoning bags, zipper bags, labeling bags, and multi-material splicing bags can also be selected later.
ZW-A8 (Zhenzhi Edition) diagram:
⑴: Non-woven roll material, the maximum roll diameter is 1.20 meters.
⑵: Automatic feeding correction device. Motor smoothly feeding; photoelectric tracking correction; no material stop; automatic tension.
⑶: Independent uniform tension device. Ensure that the tension of the coil directly from the largest to the smallest of the whole machine is uniform.
⑷: Folding and ironing device. Handwheel screw adjustment, ultrasonic welding.
⑸: Correction device for the rear machine. Control the center of the fabric of the rear machine and the front machine to ensure the bag opening is neat.
⑹: Handle coil material, the maximum coil material diameter is 1.2 meters.
⑺: Double automatic ironing device. Handle length 380mm-600mm; handle width 25mm-30mm; stop without material, stop without hot handle.
⑻: rear feeding device. Cooperate with the front feeding device to control the fabric tension when tracking the indentation.
⑼: Tracking indentation device. Color mark tracking; side indentation.
⑽: Front feeding storage device. Double tracking feeding; pre-stored sheet material to improve the speed of the whole machine; cold cutting knife.
⑾: Operation panel. Large touch screen operation; can swing 90 degrees, the interface is clear and easy to operate.
⑿: Double servo pulling device. The double servo adjusts the cloth and the mold to control the uniformity of the bag mouth. High-speed servo improves the speed of the whole machine.
⒀: Mould device. The servo synchronous wheel running device is high-speed and silent; the mold positioning device is convenient for changing molds.
⒁: side plug; bottom plug; ultrasonic welding device. Full motor structure, precise and high speed. The motor automatically adjusts the distance and is easy to operate.
⒂: Unpacking device. Four groups of unpacking can be adjusted independently. Easy to operate.
⒃: Automatic bag folding device. At the same time, the finished three-dimensional bags are folded and flattened, and stacked together.
Technical parameter:
|
power supply
|
380v
|
|
|
|
Applicable raw materials
|
Non-woven fabric, PP film, woven material lamination (cylindrical; lamination)
|
Average power
|
15-20KW
|
|
Material thickness
|
50-120g
|
Production speed
|
70-100个/分钟
|
|
Bag height
|
150-450mm
|
bag front width
|
180mm - 570mm
|
|
Bag side width
|
70-200mm
|
Total Weight
|
11500kg
|
|
Feed width
|
370-1160mm
|
Bag strip
|
400 - 600mm
|
|
Installation size
|
Length 7.8 meters × width 5.2 meters × height 2.5 meters
|
1. How many workers needed for one machine?
Normal two workers,one is operator, another is packer.
2. How long is the machine warranty?
Warranty period for the delivered equipment will be 12month after completion of erection but not later than 18months after shipment. In case any item proves to be defective and the damage is confirmed by seller's technicians within this period, the seller will at their choice either send engineer to repair or supply a new one for replacement free of charge on the basis of CNF delivery.
3. Will you send your engineer to our factory?
Under normal circumstances, engineers can be sent out to install machine. If there is an epidemic, they will not be dispatched.hope you understand Based on the current epidemic ,we prepared many works.Our machines have Internet of Things,we install camera on machines to help our customers to install and run machines from our factory .And there are machine manual book and videos even can call our old local customers to come to help and support our customers if our engineers cannot be dispatched.
4. What should we charge for your engineer?
The buyer should cover engineer's salary, visa cost, Round air tickets, accommodations, transportation in buyer's country, food, medical care, safety cost, and related cost happens in buyer's country. Also, the buyer should prepare enough labor, electric wire outside the control panel and tools for installation. And salary is USD 80/day, depending on how the engineer make you satisfied. The date he arrives and leaves shall be counted as paid day.
5. How many days for finishing installation after engineer come to our factory?
The seller will send 1 engineer to install, test the production line and train customer's workers at buyer's factory. It will take 12 days for the whole installation and training.
6. Can your engineers understand English?
Our engineers understand a little English. All of our engineers have more than five years experiences on machine's installation. In addition, they can use body language to communicate with customers.
7. How do we solve the machine problem after your engineer leaving?
Normally,there will be no problem after finish installing. In case you have any problem,you can contact our after sales specialist at any time.Our after-sales department with 30 engineers.Our engineers will take a solution video according your description.
8. If the sizes that I want your standard machine can not make ,can you customize the machine what I want?
Yes.Our machines could be customized after we getting full communications
